In-Place Add-in Application for AutoCAD

In-Place allows you to rotate and scale drawing objects in AutoCAD altogether relative to their own center points as base points.

Rotating objects relative to their own center points

Rotate In-Place (RIPL)
RIPL

To rotate objects around their center points, follow these steps:

  1. From the ribbon, choose In-Place tab ➪ Rotate In-Place ➪ RIPL (you can also type the command RIPL in the command bar).
  2. At the Select objects for rotation in place: prompt, select the objects you want to rotate then press Enter (or right-click).
  3. At the Enter rotation angle: prompt, enter the rotation angle in decimal degrees then press Enter (or right-click).

Scaling objects relative to their own center points

Scale In-Place (SIPL)
SIPL
To scale objects around their center points, follow these steps:
  1. From the ribbon, choose In-Place tab ➪ Scale In-Place ➪ SIPL (you can also type the command SIPL in the command bar).
  2. At the Select objects for scaling in place: prompt, select the objects you want to scale then press Enter (or right-click).
  3. At the Enter scale factor: prompt, enter the scale factor then press Enter (or right-click).

Follow us

© Copyright 2020 PrimoCAD • All Rights Reserved

Bitnami